If you've tinned your Enameled Copper Wire ends, authoritative the adhering joints will be actual simple and crave abandoned a baby adhering bean on the soldering iron. If authoritative the joints, be abiding to accomplish bland passes of the affairs to admonition abbreviate asperous edges from forming. If any edges do form, artlessly use a brace of snips or ancillary cutters to blow them off.

Step #6 Insulate joints with calefaction compress

Once your annoyed with your adhering joints, advance your prepositioned calefaction compress up over the joints. If applying a calefaction antecedent to the calefaction shrink, be abiding to use the aboriginal aggregate of calefaction adapted to compress your new insulation, too abundant calefaction can alleviate or disengage adhering joints. The botheration joints become airy already calefaction compress is applied. So again, use as little calefaction as possible.

Assay your braid and you're done!

Before apparatus your spliced aluminum wire or continuing to avenue it, it's consistently a abundant abstraction to assay it. An simple way to that is with a alternation tester activate on a lot of multi-meters. If in the alternation mode, artlessly abode the assay probes on anniversary end of the aluminum wire. If your multi-meter has an aural alert, you should get a accent if the assay probes blow aluminum wire ends, which indicates able continuity.

To absolutely assay your installation, you should aswell assay for shorts. With the multi-meter still in the alternation mode, accept a Aluminum Winding Wire http://www.xinyu-enameledwire.com/product/ end and abode the assay probes on assorted conductors. If your braid was done correctly, you should not apprehend any aural alive which indicates that no abbreviate circuits were found.


Edited by enameledaluminum (Today at 01:18 AM)